Omega Engineering And Trading

- Omega represents Crane Fluid Systems in Egypt for the full valve range, not pipe fittings alone. Crane is a valve manufacturer across every principal type used in building services: butterfly, gate, globe, check, ball and balancing valves, together with strainers, air vents and commissioning sets. - Our stock covers the sizes contractors call for most on chilled water, heating and condenser water systems. Fully lugged and wafer butterfly valves are held in lever and gearbox versions; cast iron and bronze gate, globe and check valves cover isolation and non-return duty on plant rooms and risers; Y-type strainers protect pumps, chillers and control valves from debris at commissioning and in service. - For variable flow systems we supply the Peak Pro pressure independent control valve, which combines differential pressure regulation and flow limitation in one body, removing the need for separate balancing at each terminal and holding design flow as the system load changes - Omega carries these items in its own warehouses in Cairo and supports consultants at selection and sizing stage, contractors during installation, and end users afterwards with spares and technical advice.

- Cla-Val manufactures hydraulically operated automatic control valves in the United States and Switzerland. Omega supplies the range in Egypt for fire protection systems and for water distribution, where a single diaphragm operated main valve is configured by its pilot circuit to perform a specific control function.   - On fire systems we supply pressure reducing valves for high rise standpipe and hose reel risers, where floor pressures must be limited without restricting flow at the top of the building, along with deluge and preaction control valves, remote controlled solenoid valves and pump relief valves for fire pump sets.   - On water systems the same platform provides pressure reducing and pressure sustaining valves, level control valves for tanks and reservoirs, flow control and pump control valves, and check and air release valves for transmission mains.   - Because the function is set by the pilot arrangement rather than the body, valves can be re-configured or extended in service. Omega advises on selection and sizing against the actual pressure and flow conditions, supplies the valves with the required approvals for fire duty, and holds pilots, diaphragms and spare kits for maintenance.

- B Meters, founded in 1955 in Gonars, Italy, is one of Europe's leading manufacturers of water and thermal energy metering. Omega for Engineering & Trading is the sole agent for B Meters in Egypt. The water side runs from single-jet and multi-jet dry dial meters, CPR-M3 and GSD8, through static electronic meters in the HYDRODIGIT range and ultrasonic HYDROSONIC meters with no moving parts, up to GMB and GMDM Woltmann bulk meters from DN50 to DN300 and MAG-C electromagnetic meters to DN600. Combination and irrigation duty meters cover networks where low and peak flows must both be captured. On the thermal side, HYDROCAL and HYDROSONIS energy meters measure heating and cooling energy for billing, with HYDROCLIMA heat cost allocators for apportionment. Meters are MID approved under MI-001 and MI-004.   - Remote reading is a complete ecosystem: wireless MBus, wired M-Bus and LoRaWAN, with radio modules receivers, concentrators and gateways. That matters on district cooling schemes, residential towers, hotels and mixed use developments, where consumption is billed per unit and read without entering it. Omega advises on meter class, sizing and AMR integration, and stocks the standard sizes.  

- Olefini manufactures air curtains in Greece for entrances of every scale, from boutique shopfronts to industrial loading bays. Omega for Engineering & Trading is the sole agent for Olefini in Egypt. - The programme runs to six series. The core KEH, KVH and KOH curtains cover doorways from 0.8 m to 2.0 m in ambient, electrically heated and water heated versions, in 100, 150 and 200 cm widths. The designer series carries a slim architectural casing for showrooms, hotels and retail entrances where the unit stays in view. - The stainless steel series suits kitchens, food handling and hygienic areas. Recessed and concealed models sit in the ceiling void with only the discharge grille exposed. Commercial units cover shops and offices, industrial high throw units cover warehouse doors and loading bays, and the plastic series offers lightweight ABS bodied curtains with remote control for small doorways. - Air curtains cut the cooling load an air conditioning system carries at an open doorway, keep dust and insects out of food and pharmaceutical areas, and hold temperature in cold rooms while goods move through. - Omega selects units by door height and site pressure conditions, not width alone, and stocks the common sizes with controls, speed regulators and door switches.

- Proco Products, Inc. of Stockton, California manufactures expansion joints and flexible piping connectors that protect pumps, chillers and pipework from thermal growth, misalignment and vibration. Omega for Engineering & Trading is the sole agent for Proco in Egypt. We stock single and multi-arch flanged rubber joints in styles 231, 240 and 242, supplied with control rods   - where system pressure requires them, for pump suction and discharge connections at chillers, pump sets and cooling towers. Braided stainless steel flexible connectors cover higher temperature and higher pressure duties, and threaded braided hoses connect fan coil units and terminal equipment to the branch pipework.   - The wider programme covers metal and PTFE expansion joints, flexible pump connectors, duckbill check valves and pipe penetration seals. Insulated hose assemblies serve chilled water terminals where condensation would otherwise form on the connector. Correct selection depends on the movement to be absorbed, the operating pressure and temperature, and the anchoring arrangement either side of the joint. - Omega advises on this at design stage and holds the common sizes for immediate delivery.